As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.
Elektron-Users Elektron Forum Other Gear Re: Nord Mod 1 as controller for MD (1 viewing)
Go to bottom Post Reply
TOPIC: Re: Nord Mod 1 as controller for MD
#11113
headcheck
Cappy
Posts: 77
Nord Mod 1 as controller for MD 18 Years ago
Hi was wondering if anyone here has a patch for the nord modular using the rotorys to control a Machinedrum.
If not is anyone interested in this patch should i make it?

Cheers
  The topic has been locked.
#11114
Wavecircle
Chain Chomp
Posts: 518
0
Re: Nord Mod 1 as controller for MD 18 Years ago
I'm not sure if you can build specific midi out patches in the NM1. doesn't it just send standard midi CC?
  The topic has been locked.
#11115
headcheck
Cappy
Posts: 77
Re: Nord Mod 1 as controller for MD 18 Years ago
yeah your right i was just wondering if anyone had set up the correct cc messages for each knob and save as a patch to save me time.
seems like the cc numbers the MD receives from the nord are are different from the ones quoted in the elektron manual for instance track one parameter 1 quoted as being cc 10 is atualy cc 16
It also looks like ill need 4 patches to control all parameters as on different midi channels.
Ill have to persevere.
  The topic has been locked.
#11120
Wavecircle
Chain Chomp
Posts: 518
0
Re: Nord Mod 1 as controller for MD 18 Years ago
yeah, the first four MD machine controllers are on a single midi channel, and the next four on the next midi channel etc..
this is why people need max/msp, would take about 5 minutes!

Why dont you like the MD encoders?

Would be very cool in the NM2 to send some midi envelopes and LFO's to the MD controller channels.

automata and noodles and all that shit....crazy
  The topic has been locked.
#11235
mos6581
King Koopa
Posts: 232
All your base are belong to us!
Re: Nord Mod 1 as controller for MD 17 Years, 12 Months ago

seems like the cc numbers the MD receives from the nord are are different from the ones quoted in the elektron manual for instance track one parameter 1 quoted as being cc 10 is atualy cc 16


In the MD midi control reference the numbers are written as hexadecimal values 10 (read as 1, 0 not as ten) and is actually representing the deciaml value of 16.
  The topic has been locked.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 

Login Form

start Player