Chain Chomp
|
Re:OT feature requests 13 Years, 3 Months ago
|
Has the list been sent to elektron? Amazing suggestions in there.
|
|
|
The topic has been locked. |
Yoshi
|
Re:OT feature requests 13 Years, 3 Months ago
|
neilbaldwin wrote:Robbert wrote: The OT NEEDS "Per-Track-Accent-Tracks", urgently! Right now there isn't any accent functionality as it seems
P-Lock the VOL setting on the AMP page?+1 for accents!! P-locking is an option, but not as immediate and user friendly as accents, especially on long patterns! While we're on the subject on long patterns, is it just me of the OT doesn't duplicate the first 16 steps when extending a sequence??
|
|
|
The topic has been locked. |
Yoshi
|
Re:OT feature requests 13 Years, 3 Months ago
|
neilbaldwin wrote:Sounds like I'm being pissy but I'm not. Just wondering how it's implemented on MD (I don't have one ) not pissy no on the MD, you hit function + accent, are taken to the accent page, where you can select which tracks you want to apply the accents to (you can for example select "all") and the "velocity" of the accent from 1 to 15. you then place accents with the trigs. it's painless and great fun. the main difference with p-locking volumes is that you can instantly apply the accents to all tracks. Something that could take a while if you have 8 tracks of 64 steps each
|
|
|
The topic has been locked. |
Yoshi
|
Re:OT feature requests 13 Years, 3 Months ago
|
a couple more ideas that i haven't seen in my quick browse of all those pages - make it easier to see what step you're on when filling the sequence with trigless trigs. as it stands, if I fill the whole 16 steps with trigless trigs, I have a really hard time distinguishing which step i'm currently on while the sequence runs. - a way for us to see the level of resampling without having to get into record mode. Right now, if I want to resample and get optimal levels, i get into recording mode, pick internal, then the LED flashes to show "incoming" signal. Oh, it's too loud. Get out of record, into the mixer page, turn the main down a bit. Back into record mode...oh, still too loud...mm, back to mixer page, turn down..back to record..now it's too low..you get the idea a wild suggestion: how about a "scene sequencer" ? enter scene sequencer mode. place triggers. For each trigger, you can lock a value for scene A from 1 to 16, a value for scene B from 1 to 16, and a value for the crossfader placement, from 1 to 127. I keep dreaming about that idea. what great fun it would be!!
|
|
|
The topic has been locked. |
Hammer Bro
|
Re:OT feature requests 13 Years, 3 Months ago
|
SecretMusic wrote:neilbaldwin wrote: Robbert wrote: The OT NEEDS "Per-Track-Accent-Tracks", urgently! Right now there isn't any accent functionality as it seems
P-Lock the VOL setting on the AMP page?
+1 for accents!! P-locking is an option, but not as immediate and user friendly as accents, especially on long patterns!
While we're on the subject on long patterns, is it just me of the OT doesn't duplicate the first 16 steps when extending a sequence??You can copy a 16 steps "page". While in record mode, go to the page you want to copy using the scale button, then hold SCALE and press RECORD (copy). Then go to the page you want to paste it using the scale button, hold SCALE and press STOP (paste).
|
|
|
The topic has been locked. |
Yoshi
|
Re:OT feature requests 13 Years, 3 Months ago
|
Jims computer beats wrote:SecretMusic wrote: neilbaldwin wrote: Robbert wrote: The OT NEEDS "Per-Track-Accent-Tracks", urgently! Right now there isn't any accent functionality as it seems
P-Lock the VOL setting on the AMP page?
+1 for accents!! P-locking is an option, but not as immediate and user friendly as accents, especially on long patterns!
While we're on the subject on long patterns, is it just me of the OT doesn't duplicate the first 16 steps when extending a sequence??
You can copy a 16 steps "page". While in record mode, go to the page you want to copy using the scale button, then hold SCALE and press RECORD (copy). Then go to the page you want to paste it using the scale button, hold SCALE and press STOP (paste).cool, and thx for that while I'm aware of this, I would like it to be just like it says in the manual, and like it does on the MD and MnM, and copy steps automatically. I know it will come, and it's certainly not a big deal, just a remark!
|
|
|
The topic has been locked. |
Boo
|
Re:OT feature requests 13 Years, 3 Months ago
|
Hi, I'm new, but would like to chime in some feature requests for this OT I just bought and really am liking.
I"d like the AMP envelope parameters to be sync'd to tempo and displayed in note increments (e.g., 1/16, 1/8, 1/4 1/2, 1, 2, 4, etc.) so that you could use it to play specific rhythms with the samples, and it would be maintained over tempo changes.
I don't think mixer settings should be saved with parts, especially cue volume. If I'm using the cue output as an external FX send, I don't want the send to be reset to zero when I change to a pattern with a different part. Even the track volumes, when I'm tweaking them, I don't want them to automatically reset on me. Besides, there's always the AMP volume parameter for that.
+1 to being able to copy banks between projects. I need that.
And +1 to wet/dry or bypass for the FX.
This is kind of pie-in-the sky, but I'd love to see some gain expansion on the LOFI effect so that it wouldn't add so much volume when things get very distorted. A master volume would also be nice for that effect.
Sorry to be so picky on my first day. I really do like the OT a lot!
|
|
|
The topic has been locked. |
Killer Beez
0
|
Re:OT feature requests 13 Years, 3 Months ago
|
SecretMusic wrote:
a wild suggestion:
how about a "scene sequencer" ? enter scene sequencer mode. place triggers. For each trigger, you can lock a value for scene A from 1 to 16, a value for scene B from 1 to 16, and a value for the crossfader placement, from 1 to 127.
I keep dreaming about that idea. what great fun it would be!!
That sounds like an awesome idea. In my head it would be the perfect OT equivelent of "Ctr-All" How about pressing Scene A or Scene B would override with the currently selected scene?
|
|
|
The topic has been locked. |
Yoshi
|
Re:OT feature requests 13 Years, 3 Months ago
|
N_Rain wrote:SecretMusic wrote:
a wild suggestion:
how about a "scene sequencer" ? enter scene sequencer mode. place triggers. For each trigger, you can lock a value for scene A from 1 to 16, a value for scene B from 1 to 16, and a value for the crossfader placement, from 1 to 127.
I keep dreaming about that idea. what great fun it would be!!
That sounds like an awesome idea. In my head it would be the perfect OT equivelent of "Ctr-All" How about pressing Scene A or Scene B would override with the currently selected scene?mm..tasty
|
|
|
The topic has been locked. |
King Koopa
0
|
Re:OT feature requests 13 Years, 3 Months ago
|
The "End" parameter so we can modulate loop lenght.
|
|
|
The topic has been locked. |
|