The picture up at elektron.se shows a flex machine with start and end parameters.
What id like, is an length parameter instead of the end parameter. So if you loop something and hits a perfect pitch, you can change only the start parameter to keep the pitch of the loop. Instead of having to p-lock / modulate both start and end parameter.
N_Rain wrote: hmm.. they've move all the parameters except pitch around on the pic at elektron.se. Also the loaded part appears to have a name. Interesting indeed..
Sure wish there were three fx blocks per track.. or at least a fixed filter per track and then two additional fx blocks. I find I use the filter a LOT so that means I only get one more effect without sacrificing a virgin to a neighbor track. 3 fx per track please!
[maybe I'm missing something but I think this IS missing]
A fast EnvelopeGenerator per Track. The AmpPage is not doing the job (as I like it to be done) to form a sample within the OT. A "decay" parameter would be appreciated. Workarounds with LFOs is not so nice...
In gerneral it would be very nice to have some soundforming parameters (like form the MD) within the OT, maybe the ramp and tick from the trx-machines, the rdec from the efm-machine. I don't think this would render the md useless next to the ot. But at this point the OT simply lacks some basic soundforming-tools, so at least a decay and a ramp parameter are basic.
- In the Mixer able to access all track volume parameters while in mixer mode.
- Track Parameter reset (No part) : How can I reset all knobs to "original settings of an untouched" Track, ´cause if I overtweak an track and I only want to go back to normal settings. It´s definitive not cool to move all knobs back to original settings.
- If you press a button to lock (parameter locks) the setting I set it up and press it again I would have the same configuration of this parameter
- Midi sequencer accepts several notes at once in one step