Elektron-Users

Can we have some better routing functionality for those of us who are using the cue outputs as alternative effects outputs please.

Ideally: cue+function and track would switch between outputs (mute one and un-mute the other ) for that track so we can creatively switch routing during a performance more easily.

Also: make the level knob scale the level of both the main and cue outputs simultaneously so that after changing the level of a track there won't be a significant change in level when switching between outputs. Holding cue will still let you change the cue output independently though. Or perhaps a 'link' option for the main and cue levels in the system menu for those of us who need it?

Or at least,: cue+function and level knob would scale the level of both the main and cue outputs simultaneously.

Cheers.

Pressing buttons: Scene A ( B ) + Part -> copy current part into current Scene.
Ofcourse, if scene not empty, maybe need window "Scene not empty. Are You shure?" or/and undo function
This feature need for crossfading beetwen pars, eg... and for easy/fast Scene filling
tsanx

Double Click the knobs to return to neutral/starting value

ie; Low Freq EQ Knob set at 64,
turned down to 1, cutting the bass,
double press, jumps back to 64

Fader Curves
hold down A+B Scene buttons (maybe +Function key)
display fader curves between A+B
linear, curved, and sloped
X........ (__)......... ""__/

Need:
Parameter Value for the 7 Knobs allways visible in teh display.




I don't need animated Knobs in the diplay !
I don't need space to grab those virtual Knobs in the display !
But i allways need to see the Value that is adjusted !
is that not one of the senses of the display ? can't understand

I like it because I think live it's better to have a visual representation of the absolute value of the current position of the knob than just a number.

When you want to see the number u can also just push the knob.

Transient detection for slicing. Equal divisions just doesn't cut it.

Daim wrote:
I like it because I think live it's better to have a visual representation of the absolute value of the current position of the knob than just a number.

When you want to see the number u can also just push the knob.
when they move the virtual Knobs in the display a bit upwards,
why should that change anything on the visual representation of that Knob ?
me too, i like to see the position of the virtual knob
but on retrigger,(short) Delay Values, cranked up feedback values, the knobposition itself is not enough.
I don't see any logic in your answer

well.. you said you don't need animated knobs and i answered why i like the animation. didn't know you were talking about the grabbing animation only

The pitch p-locking via MIDI keyboard starting from OS 0.998 is just great. Even greater would be a generalized kind of that feature in a way similar to the MnM's key tracking settings, so you could select which parameter to be locked via keyboard, e.g. sample selection, slice number or even FX parameter values..

I'd like to see an ADSR designer just below the LFO designer, where you could design an envelope which you could then select as the shape of an LFO (with one shot mode as an option) and route to whatever parameter you want. I like the AHR in the amp page, but the lack of a decay stage makes shaping percussion sounds harder; same with the filter. I know the OT is not really a synthesizer, but with the looping of single cycle waveform it can still be pretty awesome... It just lacks a full featured envelope!