Elektron-Users

maybe an HQ setting at the expense of the maximum number of fx blocks/quality could do it? similar to the way we can now choose sample resolution/memory allocation??

bauer wrote:
maybe an HQ setting at the expense of the maximum number of fx blocks/quality could do it? similar to the way we can now choose sample resolution/memory allocation??

If we could freely allocate DSP to different functions-that would be HUGE.

So siiiimple request here... if it is technically possible...

::::§§§ A software setting (under the personalize menu) to switch the midi-thru plug to a mirror midi-out §§§::::

Why?:
I use the Octa as my central 'hub', it is always the midi clock/seq master... Consequently I never use the thru plug... but I do have to always carry around a separate midi splitter box.

Possible technical problem:
Manufacturers often simply hardwire the midi in to the thru... (If that is the case maybe I will just open mine up and rewire the midi-port. Hmm another diy project to half-finish )

Looper to work in slave, pre effect muting, different play modes, independent track lengths on the trigger tracks (ie independent of the associated track).

part-reload per track option, so we can reload the settings for just one track. would be very useful.

not sure what button combos are available, though - FUNC + PART + TRACK?

+1 for pre effect muting!

Also - Must have Parameter locking on Pickup Machines!!

+1 for pre-fx muting too!

option in personalize menu where you can choose it the "stop" button stop the pattern immediatly or after the pattern is done.

Did anybody say this already?
1) preview of samples should be possible only from Headphones, without the previewed sample being played through the Main or Cue outputs!
So it would be easier to use the Cue outputs as a second pair of outputs.

2) pickup machine must be able to work in slave mode.
It hurts when you buy Ableton to use it as a looper synced with the OT and you find out that this will not be possible with Ableton slaved.
I have been told that the OT cannot be slaved when the pickup is used, because it needs to be sample accurate for the looper to work well with the timestretch algorythm.
A guy suggested me that this could be possible if the OT would be able to separate the received midi clock from the internally generated audio clock at the moment of linking the timestretch algorythm with the looper. So all would be sample accurate, and in sync, slaved. Well, in theory.

3) a more direct way to solo tracks without entering in other menus!
For example, as you can do track+mute to mute, you could do track+function+mute to solo that track

Control of sequencer direction/step selection via LFOs!