Game & Watch
|
Re:Official Elektron MM & MD 'Bug' List 14 Years ago
|
+Drive bug - MD V. 1.61B
Resample, thereby creating RAM content. Move content to ROM. Copy ROM from one samplebank to another. Attempt to use File Transfer and C6 to send the SYX associated with the audio content. Upon attempting to Send in the File Transfer area, the MD will say the ROM slot is Empty. Because of this, content cannot be transferred.
Notes: this would appear to be a simple bug in that there is probably a flag set somewhere in the code that the slot is empty, when it is in fact not.
|
|
|
The topic has been locked. |
Chain Chomp
|
Re:Official Elektron MM & MD 'Bug' List 14 Years ago
|
I just picked up a new SPS-1UW+ with OS 1.61 C and noticed that there is a missing pixel displayed in the master FX section. It appears in the second character of the label for MONO, GATE, & OUTG....
Has anyone else noticed this? Is this a bug or a blown pixel? Any thoughts???
|
|
|
The topic has been locked. |
Goomba
|
Re:Official Elektron MM & MD 'Bug' List 14 Years ago
|
i'm just baffled that something so expensive has any bugs at all.
|
|
|
The topic has been locked. |
King Koopa
|
Re:Official Elektron MM & MD 'Bug' List 13 Years, 10 Months ago
|
MDII UW+ Bugs OS 1.62
A few bugs I have noticed.
1. Deleting a samplebank does not revert the name to -- but instead changes to 002 for instance, I believe this is causing issue 2 below.
2. After deleting a samplebank the corresponding count in the +drive settings is not always updated. Showing more samplebanks in use than the true figure.
3. It is possible to unlock and delete a samplebank, however, sometimes after deleting the samplebank the empty slot still says 'locked' in the bottom right corner. It is neither possible to unlock this slot without a samplebank present nor write a new samplebank to this slot due to write protection still being active. (I have only tested re-writing to the slot via copy / paste, not via SDS dump).
Sent to elektron support via email.
|
|
|
The topic has been locked. |
Goomba
|
Re:Official Elektron MM & MD 'Bug' List 13 Years, 9 Months ago
|
I ve noticed a few times that while playing a pattern, Ill go to change to another pattern but it will be stuck on the one playing. It loops fine but no other buttons work, cant alter the sound, cant change pattern, the only solution is to power off and on again......not ideal, probably happened 3 times in the last week, anyone else have this problem?
|
|
|
The topic has been locked. |
Killer Beez
monomachine mk2, Analog 4, boss dr110
|
Re:Official Elektron MM & MD 'Bug' List 13 Years, 9 Months ago
|
ram machines have ALWAYS Been buggy for starters, anyone experience a non working ram record after you have recorded a synth and not elected to load all samples? ' load samples' is one stupid and unnecessary option!! ram machines just have mind of their own the best way around this idiosyncratic behavior is too always clear the machine with the function plus clear and reload
|
|
|
The topic has been locked. |
Cappy
|
Re:Official Elektron MM & MD 'Bug' List 13 Years, 8 Months ago
|
Bug here i think...
Machinedrum SPS1 UW+ MKII OS: latest 1.62
MachineDrum (pattern A01) - Kit 1 has MID3 Machine assigned to track 12, and MID4 Machine assigned to track 13 Nord Rack 2X - Slot 3 = receives on MIDI Chl 3 Nord Rack 2X - Slot 4 = receives on MIDI Chl 4
So effectively machinedrum track 12 plays Nord slot 3, and machinedrum track 13 plays Nord slot 4
MD pattern A01 - tracks 12 and 13 have trigs on 1,5,9,13 each p-locking different values for program change (PRG bottom left encoder on routing page) and also bank select (CC32)
Press play and the result is the Nord constantly changing banks and programs with each trig.
However this is where im seeing issues. When I mute track 12 everything works fine; MD track 13 plays Nord slot 4, and the correct bank selects & program changes occur. However when I unmute MD track 12 (so it plays alongside track 13) it starts to affect bank select values in the Nord slot 4 aswell as slot 3, where it should only affect Nord slot 3. So its as if there is cross talk between midi channels 3 and 4. Im not sure if this would be an issue with the Nord, but it sounds more to me like a bug on the MD, and that the MD is sending bank select changes from the MID3 machine on midi channel 4 when it shouldn't be. Has anyone else experienced anything like this?
Hopefully thats clear and understandable..
|
|
|
The topic has been locked. |
Boo
|
Re:Official Elektron MM & MD 'Bug' List 13 Years, 3 Months ago
|
MNM Did anyone ever experience that; - a note off - pressing "stop" - muting a track with function+track button triggers the leftmost note in the 4th octave? Then restart and it's back to normal.
|
|
|
The topic has been locked. |
Yoshi
0
|
Re:Official Elektron MM & MD 'Bug' List 13 Years, 3 Months ago
|
With the MD, sometimes copying and pasting tracks erases the notes on some adjacent tracks.
It has happened to me twice, but I could not replicate it.
Anyone seen this behavior?
|
|
|
The topic has been locked. |
Admin
0
|
Re:Official Elektron MM & MD 'Bug' List 13 Years, 3 Months ago
|
Hi,
My Octatrack crashed last night for the first time.
I think it was most probably the CF card crashing.
I attempted to load a new sample into the audio pool and was holding down 'Function' to scan through my sample library a bit quicker, as the sample I wanted was named 'Tight' and was quite far down the list.
I had 5 or 6 tracks playing back, but pretty simple stuff, no long or heavy samples / effects.
Suddenly the OT froze and this error message appeared -
EXCEPTION SSP:4 VEC:05 FS:0 SR:2000 ADDR:40011762
I have passed this onto Elektron.
|
|
|
The topic has been locked. |
|