Chain Chomp
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
nljdj wrote:22tape wrote: MDUW MKII-- 1.52
using a rom machine. place a note a note trigger anywhere in a pattern. play. it'll play fine. add another note trigger within the same pattern. p-lock any parameter of the second note trigger. play. MD will ignore the p-lock and just play the sample without change.
or, same scenario except--
add the second note triggger and give it a p-lock. play. the MD will play the p-lock for the second note trigger but that same p-lock will register for any other note triggers that you have in the same pattern.
so, the MD will not recognize a p-lock for a note, or it will recognize it and apply the same p-lock to all notes in the pattern.
VERY VERY frustrating.
you should email elektron with that one.thanks, i've done just that
|
|
|
The topic has been locked. |
Chain Chomp
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
swiv wrote:22tape wrote: ... so, the MD will not recognize a p-lock for a note, or it will recognize it and apply the same p-lock to all notes in the pattern.
Does this happen after hitting stop? I find that occasionally if I stop the sequencer and start it again, it will "keep" the p-lock parameters for a track from when I hit stop, until it reaches another p-locked trig. That has happened for me since 1.5 (when my MD was new.) It's as though occasionally when hitting stop, the MD skips trashing the p-lock memory / resetting the machines values (well however this thing works.)unfortunately, hitting stop doesn't fix it. sometimes rebooting the MD solves it-- but only for the problematic p-lock. if i p-lock a new note, the same problem happens
|
|
|
The topic has been locked. |
Admin
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
hageir wrote:Tantacle wrote: bugs after updating MD UW MKII to 1.52 OS:
changed GLOBALS settings to accept external clock and control. This change didn't "take"- the screen said it was listening to external, but the MD wasn't reacting to the start of my external sequencer. -J
Also, in the sample manager, it doesnt say % it only says 30 used (It used to be 30% before) Where's the % mark?! Not that it matters, but it's something that was lost during the update? like the external clock?I had issues with the external clock in my new MKII MD too, at first it was just not recognizing the midi clock at all. In my case I think it was a TM-1 issue though, as unplugging and plugging it back in a few times finally seemed to work. The missing "%" in the sample manager threw me off too, I was thinking it looked odd.
|
|
|
The topic has been locked. |
King Koopa
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
makko wrote:i just upgraded to 1.52b
and i think i found an LFO bug?
When you assign an LFO to another track, you cant use the EXP iEXP waveforms anymore.
could somebody confirm please?
|
|
|
The topic has been locked. |
Game & Watch
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
Tarekith wrote:hageir wrote: Tantacle wrote: bugs after updating MD UW MKII to 1.52 OS:
changed GLOBALS settings to accept external clock and control. This change didn't "take"- the screen said it was listening to external, but the MD wasn't reacting to the start of my external sequencer. -J
Also, in the sample manager, it doesnt say % it only says 30 used (It used to be 30% before) Where's the % mark?! Not that it matters, but it's something that was lost during the update? like the external clock?
I had issues with the external clock in my new MKII MD too, at first it was just not recognizing the midi clock at all. In my case I think it was a TM-1 issue though, as unplugging and plugging it back in a few times finally seemed to work.
The missing "%" in the sample manager threw me off too, I was thinking it looked odd.Yeah! BRING BACK THE % TO THE PEOPLE, IT'S OURS!!! makko wrote:makko wrote: i just upgraded to 1.52b
and i think i found an LFO bug?
When you assign an LFO to another track, you cant use the EXP iEXP waveforms anymore.
could somebody confirm please?are they set to trig and really fast? are you sure you're just not hearing them?
|
|
|
The topic has been locked. |
Admin
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
Did they remove the ability to use LFO's on CTR-AL tracks? Could have sworn I'd done that before. Whats odd is that you can control a CTR-AL track via LFO on a second track.
|
|
|
The topic has been locked. |
King Koopa
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
and if you use the EXP / iEXP LFO waveforms on the second track, does it still work? @Hageir, they are set to Trig, but i even tried hold and free, no result. And of course i tweaked de speed knob, still no effect. If i use LFO 1 on track1 everything works fine! but when i set LFO 2 to track1, the EXP/iEXP waveforms won't affect any parameter. so I'm pretty shure im not just not hearing them All the other waveforms work fine tho and tarekith, i will try the LFO on CTR-AL tracks tomorrow on my machine, im curious. these things sucks!
|
|
|
The topic has been locked. |
Game & Watch
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
Song Mode doesn't stop at the end, it just starts playing the previously selected pattern! It's really annoying!
|
|
|
The topic has been locked. |
Chain Chomp
cold-date 10,191
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
hageir wrote: Song Mode doesn't stop at the end, it just starts playing the previously selected pattern! It's really annoying!
WOW yer right!!!! Arg, I was just about to record a song too. Dammit hahaha.
Wonder if I should go backwards to 1.52 for the time being.
|
|
|
The topic has been locked. |
King Koopa
|
Re:Official Elektron MM & MD 'Bug' List 15 Years, 9 Months ago
|
Will you folks please email these bugs to elektron so they can get fixed soon ? It sounds as if i picked a bad time to finally upgrade. I waited a little while to see if anything came up, then RIGHT after i upgraded firmware, i start hearing about all the bugs! It seems so common and frustrating with various products that everytime one thing is fixed, another is broken... Thanks.
|
|
|
The topic has been locked. |
|