As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.
Elektron-Users Elektron Forum Elektron Gear New OS for the machinedrum 1.53 (1 viewing)
Go to bottom Post Reply
TOPIC: New OS for the machinedrum 1.53
#71867
Opuswerk
King Koopa
Posts: 273
www.soundcloud.ch/opuswerk
www.opuswerk.ch

Kit:
MD MKII UW
Vermona MonoLancet
Vermona Retroverb MKI
uWave XT
MKS70
Strymon El Capistan
NI Maschine
Re:New OS for the machinedrum 1.53 14 Years, 8 Months ago
installed 1.53b today, everything's in place and sounds fine. Will do some more extensive checks later on
  The topic has been locked.
#71883
NoiseLab
King Koopa
Posts: 275
NoiseLab56309
MySpace
DSP Rules!!!
Re:New OS for the machinedrum 1.53 14 Years, 8 Months ago
So now waiting for a fresh MnM OS 1.22(b) and some Elektron Films... that would be... nice!...

...let the new dawn begin!...
  The topic has been locked.
#73210
Slown
Goomba
Posts: 7
Re:New OS for the machinedrum 1.53 14 Years, 8 Months ago
Hi,
since I upgraded to OS 1.53b, I can see the position of parameters linked to LFOs move.
It works with all ctr machines (except ctr-all).
So, when it moves, I can not see the value I have set anymore...
Did someone notice that ? What do you think about this ?
  The topic has been locked.
#73212
jims computer beats
Hammer Bro
Posts: 792
on soundcloud
Re:New OS for the machinedrum 1.53 14 Years, 8 Months ago
Slown wrote:
Hi,
since I upgraded to OS 1.53b, I can see the position of parameters linked to LFOs move.
It works with all ctr machines (except ctr-all).
So, when it moves, I can not see the value I have set anymore...
Did someone notice that ? What do you think about this ?

You should see the original value when the MD is stopped. I think it's a great feature. You can see right away which parameter is affected by LFOs, and get a better view of the speed and depth...
  The topic has been locked.
#73218
Slown
Goomba
Posts: 7
Re:New OS for the machinedrum 1.53 14 Years, 8 Months ago
I think it's great to see the movements for the same reasons as you described...
BUT It still moves when the MD is stopped ! So I can not see the original value if an LFO is affected... Any solutions ?
  The topic has been locked.
#73219
jims computer beats
Hammer Bro
Posts: 792
on soundcloud
Re:New OS for the machinedrum 1.53 14 Years, 8 Months ago
I'm not in front of the MD now... But have you tried pushing (and not turning) down the knob of the LFO'd parameter to see if it shows a value?
  The topic has been locked.
#73223
Slown
Goomba
Posts: 7
Re:New OS for the machinedrum 1.53 14 Years, 8 Months ago
Jims computer beats wrote:
I'm not in front of the MD now... But have you tried pushing (and not turning) down the knob of the LFO'd parameter to see if it shows a value?

I will try tonight...
  The topic has been locked.
#73230
teacherofstalker
Hammer Bro
Posts: 697
Re:New OS for the machinedrum 1.53 14 Years, 8 Months ago
Hi, it doesn't work: Even when stopped, you can see the LFO affecting the specified parameter. That's not really that impractical, but if you try tweaking the parameter with the decoders, weird things start happening. (I'll start a new post for this)
  The topic has been locked.
#73343
Slown
Goomba
Posts: 7
Re:New OS for the machinedrum 1.53 14 Years, 7 Months ago
Jims computer beats wrote:
I'm not in front of the MD now... But have you tried pushing (and not turning) down the knob of the LFO'd parameter to see if it shows a value?

Niet, it doesn't work.


TeacherOfStalker wrote:
Hi, it doesn't work: Even when stopped, you can see the LFO affecting the specified parameter. That's not really that impractical, but if you try tweaking the parameter with the decoders, weird things start happening. (I'll start a new post for this)

The only solution is to turn down the LFO.
So I think this feature is a bit questionable, and it's a great idea to open a post about that to have more opinions and maybe solutions...
  The topic has been locked.
#73378
jims computer beats
Hammer Bro
Posts: 792
on soundcloud
Re:New OS for the machinedrum 1.53 14 Years, 7 Months ago
Slown wrote:
The only solution is to turn down the LFO.
So I think this feature is a bit questionable, and it's a great idea to open a post about that to have more opinions and maybe solutions...

I really like this feature TBH. When I first got the MD, I was wondering why we didn't see the LFO'ed parameter moving. Anyway, I try to adjust the sound with my ears generally, and try not to look at the screen for a digital value. In fact, it should be great if there was an "hide parameters digital value" in the global menu. I have a hard time not looking at the screen and adjust with my ears; instead I tend to put what I think is the right digital value.
  The topic has been locked.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 

Login Form

start Player