As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.
Elektron-Users Elektron Forum Elektron Gear Re:OT - answers sticky: PLEASE READ (1 viewing)
Go to bottom Post Reply
TOPIC: Re:OT - answers sticky: PLEASE READ
#115232
Goomba
Posts: 19
Re:OT - answers sticky: PLEASE READ 3 Years, 9 Months ago
Lil' Bug:

If I move the fader a little too quickly (no matter the effect) the audio signal just straight up drops out (using static machines - sample just stops)

(OS 0.99B&C)
  The topic has been locked.
#115385
Chain Chomp
Posts: 387
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
ot os0.99-0.99c
did anyone decipher what the amp setup page is about?
i can guess what atck lin-log means but what about anlg,rtrg,r+t,ttrg under amp&fx ?

edit: the new online manual describes them.
  The topic has been locked.
#115403
Goomba
Posts: 30
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
Updated to 0.99c today.
Somehow it totally fucked up my CF-Card (the included one).
I can't put samples or older projects on it,
so i tried to zero-delete it,but somehow some other stuff still stays on the card and i don't know what to do anymore
  The topic has been locked.
#115443
Cappy
Posts: 51
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
Well, since the data is a total loss, most computers have a way to format the card completely. I'd give that a shot.
  The topic has been locked.
#115463
Goomba
Posts: 23
0
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
Hello ,
This is my first post here, just to mention a little bug on the OT :
Do the undos work for you ?
I mean for example when I clear a pattern by pressing Func+play, I should be able to undo it by pressing again func+play, but it doesn't work. (Page 43 of the manual).
Same for all copy paste and clear ops...
I am on OS 0.99c.
Do you have same issue, or am I making a mistake ?
  The topic has been locked.
#115471
Chain Chomp
Posts: 387
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
wurl wrote:

Do the undos work for you ?


no, doesn´t work on mine either.
neither could i make the track copy funtion nor the track page copy work.
yet
  The topic has been locked.
#115474
Goomba
Posts: 30
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
Just bought a new CF-Card and everything works fine,i can copy my old projects on it again and the OT recognizes everything that i copy or delete on my Mac with an external card-reader.
It's weird - the Transcend-CF that came with the OT seems to suck a little lot
  The topic has been locked.
#115475
Goomba
Posts: 30
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
Just bought a new CF-Card and everything works fine,i can copy my old projects on it again and the OT recognizes everything that i copy or delete on my Mac with an external card-reader.
It's weird - the Transcend-CF that came with the OT seems to suck a little lot
  The topic has been locked.
#115491
Cappy
Posts: 89
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
Spend some time today with Octa... good time!!!!

i ve got some critics about mute config vs function+param change...
in top screen when you have to mute some tracks the subtle param change became not easy because values move fast(function+param change with knob make values increase/decrease fast.)... and if you go to mixer, using trig keys for mute you lost param change...
in fact would be cool to have the ability to turn off function + param change for fast param change or a mute mode a la machinedrum/monomachine.
  The topic has been locked.
#115493
Goomba
Posts: 23
0
Re:OT - answers sticky: PLEASE READ 3 Years, 8 Months ago
Bathrobe wrote:
wurl wrote:

Do the undos work for you ?


no, doesn´t work on mine either.
neither could i make the track copy funtion nor the track page copy work.
yet


That's weird, Track copy works for me (you have to be in grid rec mode). Are you on .99c ?
  The topic has been locked.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop

Login Form

Lost Password?
start Player